千赢国际qy88.vip-千赢娱乐手机登录

HomeAbout usProductsR&DOnline messageContact中文版
Catalogue
Search
Contact

TEL套群:
0086-27-83558483
FAX忱:
0086-27-83558485
E-MAIL时躺恒:
ooha@163.com
OFFICE ADD忱镀:
No.319, Jiefang Avenue, Qiaokou District, Wuhan City ,Hubei Province, P.R.China.
P.C.挎椿胎:
430034
FACTORY ADD吠钾:Chemical Industrial Zone ,Xiantao City,Hubei Province,P.R.China

HomeProduct Center  
 
Item
Application
Characteristics
Dosage and Administration
Matting and Curing Agent
Matting Agent for Hybrid Provide 5-50% gloss
Wide selectivity to polyester 50/50, 60/40/,70/30
Excellent flow, delicate surface, good mechanical properties
1%-3.5% by weight of total formula.
Mixed with other materials and extruded
Matting Agent for Hybrid Provide 2.3-10% of gloss
Excellent flow and anti-yellowing
Wide selectivity to polyester
4-5%. Mixed with other materials
and extruded
Matting Agent for Pure Polyester Provide gloss range 5-30%
Excellent flow, anti yellowing and wide selectivity to polyester
3-6%. Mixed with other materials and extruded
Dry Blend Matting Agent Both used for interior and exterior,non-yellowing
Gloss range10-70% for hybrid,gloss range16-70% for polyester
Economic, better gloss stability
Excellent flow
0.3-2%. Prepare an appropriate base coating,then dry blend
Or dispersing quickly and mixing with mixer
Or blending slowly by hand to obtain different purpose
Acrylic Acid Matting Resin Provide 5-70% low gloss
Excellent flow and weather-resistance
1/3 of pure polyester resin
Low-temperature Curing Agent Low-temperature curing agent for epoxy
Low-temperature curing by 130° C/30 min,excellent flow
7% of epoxy resin.Mixed with other materials and extruded
A100 Curing Agent
(β-HAA Hardener )
Curing agent for polyester
Substitute of TGIC,Non-toxic
Low temperature curing property
5-6% of pure polyester,
Resin to HAA for polyester(AV ca.20-24mg KOH/g) dosage 5%
Resin to TGIC for polyester(AV ca.30-35,mg KOH/g) dosage 6%
Curing Accelerator Accelerate curing for hybrid & polyester
Anti-yellowing,excellent flow
Reduce curing temperature
Improve mechanical properties
0.1-0.3%. Mixed with other materials and extruded
Recommend dosage 0.15% in flat powder
Recommend dosage 0.3% in texture powder
Carboxyl acrylic Resin Acid value 60汲、80吭磺、140蛋、240湘偿、300监、350
Matting, reacting with epoxy
User-defined
No technical services
Epoxygroup acrylic Resin Epoxy equivalent: 300刻、500骆、600核、700
Reacting with polyester,matting
Increase the cross link density
User-defined
No technical services
Texture Agent
PUR Wrinkle Finish Agent for out door Obtain crocodile texture for outdoor
Applicable to PUR resin system
Can obtain different texture by dry blending L118
0.6%-1%, Mixed with other materials and extruded
Floating Agent Obtain special texture such as wrinkle, pattern by dry blend
Electrophoretic mobility and proportion should proximity to the powder
Economic, texture is much remarkable
0.1-0.5%.Dry blend, after base material is finished
Texture wiil be more remarkable with the dosage goes up
Wrinkling Agent Obtain special texture such as wrinkle, pattern by premix
Compare with dry blend,this way is easy and recycled powder is convenient to use either
Economic, texture is much remarkable
0.1-0.5,Mixed with other materials and extruded
When the base material is finished,then blend with L102
Sand Textured Agent Be applicable to any powder coating systems, adjusting formula can obtain different sand textured
Economic,reduce the gloss
0.1-0.4%. Mixed with other materials and extruded
Texture wiil be more remarkable and the gloss will be lower with the dosage goes up
Specific Floating Agent Obtain big wrinkles with strong three-dimensional effect
It is suitable for thick workpieces and castings coating
0.1-0.5%.Dry blend, after base material is finished
Texture wiil be more remarkable with the dosage goes up
L104 might cause contamination. When using it, must be careful and use it separately
Hammer Tone Agent React with aluminum powder to obtain hammer tone
Applicable to any powder coatings
0.1-0.4%.Mixed with other materials and extruded
The effect of hammer texture depends on polyester
Wrinkle Finish Agent Obtain texture like wrinkle, reticulated, vein and grained
Applicable to any powder coatings such as can be used in epoxy or hybrid system
Can obtain different texture by dry blending or premixing
2-3%. Mixed with other materials and extruded
Operation with safety precautions in ventilation place
Coarse Sand Textured Agent Obtain coarse sand texture with smooth hand
Suitable for produce armrest, tools and cart coatings
1%,Mixed with other materials and extruded
Usage as reference formulas
Conventional Agent
Leveling Agent Obtain smooth surface by adjusting surface tension
Stronger ability to overcome pitting and cratering
Because a special group contained in L88,the utilization rate of powder is higher when added L88
0.8-1.5%. Mixed with other materials and extruded
Gloss Enhancing Agent Obtain smooth surface,enhance gloss by adjusting surface tension
Stronger ability to overcome pitting and cratering
Because a special group contained in L701,the utilization rate of powder is higher when added L701
0.8-1.5%. Mixed with other materials and extruded
Benzoin Degassing and eliminating pinholes 0.5%. Mixed with other materials and extruded.
Anti-yellowing Benzoin Degassing and eliminating pinholes
Anti-yellowing and very smooth surface
0.5%. Mixed with other materials and extruded
Obtain very smooth surface when the dosage is 0.8%
Degassing Agent It can eliminate bubbles and pinholes
It can replace benzoin in certain products
0.5-1%. Mixed with other materials and extruded
Defoaming Agent It can eliminate bubbles and pinholes
Applicable to porous casting
0.5-1%. Mixed with other materials and extruded.
Charge Enhancing Agent Amines charge enhancing agent
Remarkable in charge enhancing
Over added will cause catalysis
0.1-0.3%. Mixed with other materials and extruded
Charge Modifier Granule size
Enhance the conductivity to improve powder coating transfer-efficiency
Overcome Faraday effect
Excellent flow and appearance of powder coatings
0.3-1%. Mixed with other materials and extruded
Specific Antistatic Agent Appearance is flaky solid
Remarkable in charge enhancing
The utilization rate of powder is higher when added L528
0.3-1%. Mixed with other materials and extruded
Obtain excellent flow when the dosage is 0.8%
Surface Modifier
Surface Conditioning Agent Adjusting the surface tension
Surface will be very smooth
0.5-1%. Mixed with other materials and extruded
Metal Brightener It makes the aluminum powder float to the coating surface and arrange regularly
Increases the surface brightness and gloss, also reduce the dosage of aluminum powder
0.5-1%. Mixed with other materials and extruded
Anti-wear Agent Improving the surface hardness, anti-scratch, wear-resistance, blocking resistance 0.5-1%. Mixed with other materials and extruded
Dispersing Agent Dispersing function for additives, pigments and fillers, and links with them
Excellent flow and very smooth surface
0.5-1%. Mixed with other materials and extruded
Coupling Agent Coupling agent contains oelophilic group and hydrophilic group, so that can crosslink resin and pigment and increaseing impact resistance,adhesion and flexural property 1%. Mixed with other materials and extruded.
Transfer Printing Dispersant Obtain clear pattern
The printing of coating surface is easy to desquamate
0.5%. Mixed with other materials and extruded
Anti-yellowing Agent Prevent coating's yellowing when baking at high temperature
Prevent oxidative yellowing when powder coating exposures in air for a long time
Improve weathering resistance
0.5%. Mixed with other materials and extruded
Leavening Agent Contain dystectic organic material, prevent blocking
Increase the fraction void of the powder and obtain excellent flow
0.5%. Mixed with other materials and extruded
Hardening Agent Improve surface hardness and anti-scratch property 0.5%. Mixed with other materials and extruded
Toughening Agent Improve powder's flexibility, bending resistance 0.5-1%. Mixed with other materials and extruded
 
  links
wuhan yincai technology co,.ltd 2012-2015 @ All Rights Reserved 网站登录
Email动斧甲:ooha@163.com  TEL亢搔:027-83558483  OFFICE ADD半上:No.319, Jiefang Avenue, Qiaokou District, Wuhan City ,Hubei Province, P.R.China.